DIY tips: ‘Clever’ way to paint any room perfectly – ‘work your way down’

Martin Roberts gives tips for getting on the property ladder

We use your sign-up to provide content in ways you’ve consented to and to improve our understanding of you. This may include adverts from us and 3rd parties based on our understanding. You can unsubscribe at any time. More info

Many people often paint rooms in the home themselves, instead of getting a professional in. However, it can be a tricky task, especially if the room is large. Frenchic have provided top tips on the “proper way” to paint any room in the home.

They explained: “As a rule, you should start at the top and work your way down when painting a room, meaning walls come before skirting boards.

“This clever top-down approach stops drip marks and overspray from ruining newly painted surfaces below.”

The correct order to paint a room is ceilings, walls, skirting boards and frames followed by doors.

Frenchic said: “You should always start with ceilings because rollers often splatter excess paint onto surrounding walls.

“First, liberally lay down dust sheetings before cutting in the edges using a suitable sized brush, around 50mm, flat or oval.

“Then, roll paint in square sections across the ceiling for even coverage.”

Once the ceiling is dry, walls can be rolled with the chosen colour.

Walls typically only need one or two coats, depending on the brand and type of paint used.

Mrs Hinch fan shares 50p ‘game-changing’ way to clean Venetian blinds [COMMENT]
‘Easiest’ ways to add value to your home – ‘major selling point’ [INSIGHT]
Leaving plant in wet soil is a ‘crime’ – how often to water [EXPERT]

The experts continued: “You don’t need to stress about small amounts of paint getting on surrounding woodwork, door frames or skirting boards, but any large blobs are best wiped away.”

The walls must be dry before moving onto the skirting boards and frames.

Low tack masking tape can then be used to cover the immediate area above and around the skirting and frames.

Frenchic said: “This will help you achieve a sharp border when painting. 

“It’s crucial to choose the right paint for the best result.

“First and foremost, you should prepare the whole room at one time, from the ceiling down, before painting anywhere.

“When using beginner-friendly Frenchic skirting board paint for your skirting boards, surface prep is simple and no primer is required.”

Skirting boards can be cleaned using Frenchic’s sugar soap solution before sanding the woodwork down.

Looking for a new home, or just fancy a look? Add your postcode below or visit InYourArea

This helps to give it a more durable and professional finish.

Next, holes and dents can be filled with filler, before removing the excess by sanding once it has dried.

When the skirting boards are ready to paint, tape dust sheets as close to the skirting board as possible.

The experts said: “You should only paint skirting boards when all the preparation has been completed.

“Once your masking tape is in place, start with the top edge of the skirting board.

“Paint along the line of the boards, horizontally from the top edge to the base, working in small sections for a seamless finish.

“Lastly, complete the look by painting doors. Brushes are the best tool for panelled doors but you might prefer a small roller for flat floors.”

Source: Read Full Article